 |
| 6068 |
|
| Multi-Battery Chargers
Model 6068 Parallel Charger
Charges up to 36 batteries, in parallel, in less than 24 hours. Can be wall-mounted or on a stationary bench. 16 charge rates for precise charging. Each battery accepts charge required, depending on size, state of charge and temperature. Engineered so that an initial high charge rate tapers down to a safe finishing level. UL listed. Isolated transformer and a heavy-duty diode rectifier with deep reserve capacity are standard features. Digital voltmeter and digital ammeter improve accuracy and reliability. Use Model 6075 bus bar sets as needed. MADE IN USA.
MODEL NUMBER: 6068
D.C. OUTPUT: 110 A, 15.5 V
A.C. INPUT: 190-262 V, 13.8 A, 50/60 Hz
CHARGING CAPACITY: Up to Thirty-Six 12 V
CHARGE RATES: 16
VOLTMETER: Digital 1-19 V
AMMETER: 0-110 A
D.C. LEADS: 5' 1 AWG
A.C. CORD: Permanent Installation Only
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 26"x17"x14"
WEIGHT: 83 LBS.
|
 |
| 6080a |
|
| Multi-Battery Chargers
Model 6080A Series Charger
This series charger, with higher output voltage, charges new batteries and rejuvenates sulfated batteries. Fully charges six maintenance-free batteries at one time. Includes five charging leads. MADE IN USA.
MODEL NUMBER: 6080A
D.C. OUTPUT: 6 A, 106 V
A.C. INPUT: 120 V, 8 A, 60 Hz
CHARGING CAPACITY: One to Thirty-Six Cells
CHARGE RATES: 64
VOLTMETER: N/A
AMMETER: 0-6 A
D.C. LEADS: 8' 10/2 AWG
A.C. CORD: 6.5' 16-3
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 16"x19"x16"
WEIGHT: 40 LBS.
|
 |
| 6082 |
|
| Multi-Battery Chargers
Model 6082 Series Charger
The series charger workhorse. Charges two to sixty cells from 0 to 6 Amps. With state-of-the-art, anti-spark delay - voltage is shut off when current is interrupted, eliminating sparking. Added safety feature provides greater protection when charging 10 batteries where the voltage approaches 150 Volts DC. Isolated transformer and fullwave silicon rectifier. Output current can be smoothly adjusted over full range with the front panel control. Polarity protection for operator and equipment safety. Nine charging leads included. MADE IN USA.
MODEL NUMBER: 6082
D.C. OUTPUT: 6 A, 0-158 V
A.C. INPUT: 120 V, 13 A, 60 Hz
CHARGING CAPACITY: One to Sixty Cells
CHARGE RATES: Adjustable
VOLTMETER: N/A
AMMETER: 0-6 A
D.C. LEADS: 8' 10/2 AWG
A.C. CORD: 6.5' 14-3
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 16"x19"x16"
WEIGHT: 45 LBS.
|
 |
| 6075 |
|
| Multi-Battery Chargers
Model 6075 Bus Bar
Bus Bar set for parallel charging. Ten battery capacity. Use one or combine additional bars for added capacity. Insulated fiberglass backboard with 10 pairs DC charging leads, 10 gauge, 36" long with 300 Amp insulated safety clamps. Comes with 3 ft. 4 AWG cables to connect to charger or additional bus bars. Wt. 24 LBs. DIM. 31.25" x 15.25" x 5.25" MADE IN USA.
|
 |
| 6125 |
|
| STARTING SYSTEM CABLES
Model 6125
Flush mount plug-in receptacle available for Model 6139 system. Larger flush mount plug-in Model 6149 available for 1 AWG or 6146 plug-in system. MADE IN USA.
|
 |
| 6127 |
|
| Starting System
Model 6127 Kwik Start Roll Around Starter - FAST - FAST - FAST!!!
"Kwik Start" vehicles anywhere WITHOUT AC power. On-board starter battery gives more cranking power than any fast charger- up to 1100 Amps cranking power!!
This battery-replaceable wheeled charger is "easier on the back" than other so-called portables on the market.
A smart choice for car dealers, airport operations, industrial plants and shopping centers to assist both customers and employees where there is no electrical power. Plugs into any AC outlet for rapid automatic recharging.
Will Recharge battery up to 20X FASTER than hand-carried units!!
Solid state circuitry monitors battery condition and maintains maximum state of charge. Patented “Stop/Go” light on cable and 500 Amp insulated clamps with “Flexi-Spring” cable guards warn operators before making a reverse connection. Designed for easy and quick handling, safety and protection from weather and includes a convenient clamp bar for easy and safe storage of clamps when not in use. Fully automatic, 10 Amp charger recharges starter battery or any on-board 12 Volt battery. Will not overcharge. Will accommodate a user supplied group 24 battery (max. dims. L10.25"xW7.25"xH9.5"). (Battery not included with Model 6127, recommend minimum 500 CCA.) Model 6127EX available in 230VAC, 50/60 Hz. MADE IN USA.
MODEL NUMBER: 6127
D.C. OUTPUT: 10 A
A.C. INPUT: 110 V
COLD CRANKING AMPS (CCA): Up to 1100 A
CLAMPS: 500 A "FLEXI-SPRING"
D.C. LEADS: 8' 4 AWG
A.C. CORD: 6.5' 16-3
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 17"x15.88"x29"
WEIGHT: 29 LBS.
|
 |
| 6139 |
|
| STARTING SYSTEM CABLES
Model 6139 Plug-In Cable
The stainless steel receptacle mounts onto a truck bumper and connects directly to a battery. Reaches stalled vehicles from front, back or side. Includes 25 ft. tangle-free starting cables, side terminal adapters, and polarized LEXAN plug. For flush mount version, combine Model 6125 stainless steel receptacle with Model 6138 cables. MADE IN USA.
MODEL NUMBER: 6139
START LENGTH: 25'
VEHICLE CONNECTION LENGTH: 5'
GAUGE: 4 AWG
CIR. MIL. COPPER JACKET**: 41,300 T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
FLEXI-SPRING: YES
SAFETY LITE: YES
SAE RATING +: HEAVY-DUTY
SHIPPING DIMENSIONS: 6"x12"x12"
WEIGHT: 17 LBS.
|
 |
| 6146 |
|
| STARTING SYSTEM CABLES
Model 6146 Plug-In Cable
More truck starting power than an 8 HP gas starter. Extra heavy duty plug-in starting system ideal for volume car starting in extremely cold climates. Heavier 1 AWG cable has half the voltage drop as Model 6139. For flush mount version, combine Model 6149 stainless steel receptacle with 610321 cables. MADE IN USA.
MODEL NUMBER: 6146
START LENGTH: 25'
VEHICLE CONNECTION LENGTH: 5'
GAUGE: 1 AWG
CIR. MIL. COPPER JACKET**: 83,600 T-94
AMP CLAMP: 800 A
SIDE TERMINAL ADAPTERS: NO
FLEXI-SPRING: YES
SAFETY LITE: YES
SAE RATING +: SUPER HEAVY-DUTY
SHIPPING DIMENSIONS: 9"x12"x12"
WEIGHT: 26 LBS.
|
 |
| 6225 |
|
| Portable Starting Systems
Model 6225 Kwikstart
The Kwikstart 425 Rechargeable 12 Volt DC power supply is equipped with UL listed 12 Volt DC battery ideal for jump-starting cars, trucks, boats, RV's and tractors. The operator can also use up to 50 hours of portable DC power for cell phone, worklights and more. The patented clamp on bars make it easy for stowing clamps when not in use. Bright LED's will quickly show the operator the charge level in the battery. The heavy-duty carrying handle is designed for rough use. Comes equipped with a 120 Volt charger with overload protection.
MODEL NUMBER: 6225
D.C. VOLTAGE: 12 V
PEAK AMPS: 1000 A
COLD CRANKING AMPS (CCA): 250 A
BATTERY POWER: 12 V/18 AH
BOOSTER CABLES: 32" 4 AWG
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 11.5"x18"x4.25"
WEIGHT: 21 LBS.
|
 |
| 6250 |
|
| Portable Starting Systems
Model 6250 Kwikstart
The Kwikstart 650 Rechargeable 12 Volt DC power supply is equipped with UL listed 12 Volt DC Battery ideal for jump-starting cars, trucks, boats, RV's and tractors. This unit has 44% more cranking power than the Kiwkstart 425. The operator can also use up to 50 hours of portable DC power for cell phones, work lights and more. The patented clamp on bars make it easy for stowing clamps when not in use. The heavy-duty carrying handle is designed for rough use. Comes equipped with a 120 Volt charger with overload protection.
MODEL NUMBER: 6250
D.C. VOLTAGE: 12 V
PEAK AMPS: 1650 A
COLD CRANKING AMPS (CCA): 360 A
BATTERY POWER: 12 V/22 AH
BOOSTER CABLES: 32" 4 AWG
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 11.5"x18"x4.25"
WEIGHT: 22 LBS.
|
 |
| 6270 |
|
| Portable Starting Systems
Model 6270 Kwikstart
This 12 Volt power supply has twice the capacity of Model 6250. It is equipped with two 12 Volt, 22 Amp hour DC batteries. This unit has a convenient on/off switch, battery condition test meter and a bright emergency light. Unit comes equipped with a 120 Volt 1000 milliamp charger with built in overcharge protection to prolong battery life. Similar in appearance to Model 6290.
MODEL NUMBER: 6270
D.C. VOLTAGE: 12 V
PEAK AMPS: 3500 A
COLD CRANKING AMPS (CCA): 720 A
BATTERY POWER: 12 V/44 AH
BOOSTER CABLES: 66" 2 AWG
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 18.25"x16.75"x10"
WEIGHT: 44 LBS.
|
 |
| 6290 |
|
| Portable Starting Systems
Model 6290 Kwikstart
The Kwikstart 6290 Rechargeable 12/24 Volt DC Power Supply is equipped with two 12 Volt 22 Amp hour DC High Performance batteries. This heavy duty product is ideal for jump-starting cars, trucks, boats, RV's and tractors. This unit has a 3-position switch for 12 Volt / OFF / or 24 Volt settings. The operator also has up to 100 hours of portable 12 Volt DC power for cell phones, work lights and more.
The Kwikstart 6290 is also equipped with a convenient bright emergency light. This heavy-duty unit is designed for rough use. Unit comes equipped with a 120 Volt 1000 milliamp charger with built in overcharge protection to prolong battery life.
MODEL NUMBER: 6290
D.C. VOLTAGE: 12 V / 24 V
PEAK AMPS: 3500 A / 1750 A
COLD CRANKING AMPS (CCA): 720 A /360 A
BATTERY POWER: 12 V/44 AH, 24 V/22 AH
BOOSTER CABLES: 66" 2 AWG
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 18.25"x16.75"x10"
WEIGHT: 44 LBS.
|
 |
| 8540 |
|
| Starter Circuit Testers
Model 8540 Starter Circuit Tester
Allows ONE technician to handle the job of TWO when troubleshooting electrical problems in the automotive starter system.
The innovative design monitors voltage drops across key connection points in the starter system. When the voltage drop rises to a level that impedes operation of the system, the 8540's LED's inform the technician of where the problem resides. Limited One Year Warranty. The 8540 comes with standard length plug-in leads. Optional extra long lead set (Model 8542) available for large trucks and off-road equipment.
Features:
- Easy to decipher color coded leads.
- Allows hands-free operation while the technician starts the vehicle.
- Indicates you have a good connection to the points being monitored. You no longer need to guess if you have a good connection.
- Tests battery voltage to verify there is sufficient voltage before testing begins.
- Monitors four connection points at one time. Expedites testing process.
- Allows the technician to test hard to reach areas while not being put into a precarious position during the starting operation.
- Holds the status of all poor connections until the 8540 is reset, allowing the technician time to analyze the results.
- Will automatically switch to the 24 Volt test setting if battery voltage is detected above 16 Volts.
- Operates off of the vehicle’s battery, no external battery needed.
- Will test either positive or negative connected ignition switch.
|
 |
| 8650 |
|
| Specialty Testers
Model 8650 Alternator, Generator and Starter Tester
The model 8650 Tester is designed for the Fleet Operator, Parts Jobber or Ag-Industrial dealer who requires a powerful tester capable of testing alternators and batteries for full output. The unit fully load tests alternators and generators to 165 Amps (12 V) intermittently to 190 Amps and also does a free run starter test. The 8650 will load test batteries to 1000 CCA. There are two easy to read analog meters: a combination 0-35 Volt output voltmeter and auxiliary voltmeter (stator or diode trio voltages) and a combination 0-200 Amp and 0-500 Amp DC ammeter. There is a pre-test for reversed lead connections or shorted alternator diodes before turning on the motor. This feature prevents possible damage to the tester and alternator. The sliding ears with stepped pins hold alternators as the manufacturer intended - by the alternator mounting ears. Starters are held in a slide-in "V" vise. Drive motor horsepower - 5 HP single speed. Drive motor power and phase - 220 Volts AC - 60 Hz single phase. Carbon pile 18 - .25"x4"x4" plates. Adjust from 0-500 Amps - Test Voltage - 12 & 24 Volt. Serpentine pulley included. Test Leads -TBUNI Lead only. MADE IN USA
MODEL NUMBER: 8650
AMMETER: 0-500 A Analog Display
VOLTMETER: 0-35V Analog Display
DRIVE MOTOR: 5.0 HP
LEADS: 3' 4 AWG
CLAMPS: 500 A
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 28"x32"x36"
WEIGHT: 250 LBS.
|
 |
| 9002 |
|
| Portable Battery Chargers
Model 9002 1.5 AMP, 12 VOLT
Automatic Charger/Maintainer. For all vehicles, can be mounted in the vehicle. Fully automatic with charging status indicated by LED. Reverse polarity and short circuit protection. Standard Master Carton contains 2 units.
Portable Charger Specifications:
MODEL NUMBER: 9002
VOLTAGE: 12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: 1.5A
UL OR CSA CRANKING ASSIST RATING: N/A
CLAMP RATING: N/A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 2 Units
MASTER CARTON SIZE (HxWxD): 7"x4"x6"
MASTER CARTON WEIGHT: 4 LBS.
|
|