 |
| 9003 |
|
| Portable Battery Chargers
Model 9003 0.9 AMP, 6/12 VOLT
Automatic in both 6 and 12 Volt. Slide switch for 6 Volt or 12 Volt battery. Micro-processor controlled utilizing LED operating indicators. Reverse polarity short circuit operation. Battery clamps as well as optional fused battery connectors. Standard Master Carton contains 10 units.
Portable Charger Specifications:
MODEL NUMBER: 9003
VOLTAGE: 6V/12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: .9 A
UL OR CSA CRANKING ASSIST RATING: N/A
CLAMP RATING: 50A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 10 Units
MASTER CARTON SIZE (HxWxD): 8.5"x13.5"x8"
MASTER CARTON WEIGHT: 21 LBS.
|
 |
| 9004 |
|
| Portable Battery Chargers
Model 9004 0.8/2.0 AMP, 12 VOLT
Automatic Charger / Maintainer. Slide switch for either flooded or gel battery. Rocker switch for 0.8 Amp or 2.0 Amp charge. Micro-processor controlled utilizing LED operating indicators. Reverse polarity and short circuit protection. Battery clamps as well as optional fused battery connectors. True float maintainer operation. Standard Master Carton contains 6 units.
Portable Charger Specifications:
MODEL NUMBER: 9004
VOLTAGE: 12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: 0.8/2.0 A
UL OR CSA CRANKING ASSIST RATING: N/A
CLAMP RATING: 50A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 6 Units
MASTER CARTON SIZE (HxWxD): 15.5"x11.5"x10"
MASTER CARTON WEIGHT: 27 LBS.
|
 |
| 9006 |
|
| Portable Battery Chargers
Model 9006 6/2 AMP, 6/12 VOLT
Manual Economy Charger. From 4 to 6 times the power of 9002 but capable of charging small batteries. Great value for its performance. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9006
VOLTAGE: 6V/12V
TYPE: MANUAL
UL OR CSA CONTINUOUS RATING: 6A/6/2 A
UL OR CSA CRANKING ASSIST RATING: N/A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 39 LBS.
|
 |
| 9010 |
|
| Portable Battery Chargers
Model 9010 10/2 AMP, 6/12 Volt
Manual Full-Rate Charger. Ideal for charging average battery in 3 to 5 hours. 66% more power than Model 9006. Safely charges small batteries on a 2 Amp setting. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9010
VOLTAGE: 6V/12V
TYPE: MANUAL
UL OR CSA CONTINUOUS RATING: 10A/10/2 A
UL OR CSA CRANKING ASSIST RATING: N/A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 48 LBS.
|
 |
| 9014 |
|
| Portable Battery Chargers
Model 9014 10/2 AMP, 6/12 VOLT
Automatic Full-Rate Charger. Substantially reduces risk of overcharging. Manual 6 Volt position for lower voltage requirements. Great for standard, maintenance-free, deep-cycle, and small batteries. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9014
VOLTAGE: 6V/12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: 10A/10/2 A
UL OR CSA CRANKING ASSIST RATING: N/A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 48 LBS.
|
 |
| 9050 |
|
| Portable Battery Chargers
Model 9050 10/2/55 AMP, 6/12 Volt
Manual Charger with Engine Starter. Ideal for charging average battery in 3 to 5 hours. 66% more power than Model 9006. Safely charges small batteries on a 2 Amp setting. 55 Amp rated engine start. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9050
VOLTAGE: 6V/12V
TYPE: MANUAL
UL OR CSA CONTINUOUS RATING: 10A/10/2 A
UL OR CSA CRANKING ASSIST RATING: 55A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 48 LBS.
|
 |
| 9060 |
|
| Portable Battery Chargers
Model 9060 10/2/55 AMP, 6/12 VOLT
Automatic Charger with Engine Starter. Automatic 12 Volt setting turns off at full charge and turns back on if battery needs more power. Green LED signals "COMPLETE CHARGE". Red LED indicates "REVERSE HOOK-UP". Separate selection for help starting vehicle. Manual 6 Volt position for lower voltage requirements. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9060
VOLTAGE: 6V/12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: 10A/10/2 A
UL OR CSA CRANKING ASSIST RATING: 55A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 48 LBS.
|
 |
| 9070 |
|
| Portable Battery Chargers
Model 9070 12/2/70 AMP, 6/12 VOLT
Automatic Charger with Engine Starter. Automatic 12 Volt setting turns off at full charge and turns back on if battery needs more power. Green LED signals "COMPLETE CHARGE". Red LED indicates "REVERSE HOOK-UP". Separate selection for help starting vehicle and 25% more engine start capability than Model 9050 or 9060. Manual 6 Volt position for lower voltage requirements. 20% MORE POWER THAN MODEL 9060. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9070
VOLTAGE: 6V/12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: 12A/12/2 A
UL OR CSA CRANKING ASSIST RATING: 70A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 52 LBS.
|
 |
| 9090 |
|
| Portable Battery Chargers
Model 9090 15/2/100 AMP, 6/12 VOLT
Automatic Charger with Engine Starter. Automatic 12 Volt setting turns off at full charge and turns back on if battery needs more power. Third switch on unit allows enhanced deep cycle charging. Green LED signals "COMPLETE CHARGE". Red LED indicates "REVERSE HOOK-UP". Separate selection for help starting vehicle and 40% more engine start capability than Model 9070 and 80% more than Model 9050 or 9060. Manual 6 Volt position for lower voltage requirements. Standard Master Carton contains 4 units.
Portable Charger Specifications:
MODEL NUMBER: 9090
VOLTAGE: 6V/12V
TYPE: AUTOMATIC
UL OR CSA CONTINUOUS RATING: 15A/15/2 A
UL OR CSA CRANKING ASSIST RATING: 100A
CLAMP RATING: 75A
LIMITED WARRANTY: 2 YEARS
MASTER CARTON: 4 Units
MASTER CARTON SIZE (HxWxD): 20"x10.5"x11"
MASTER CARTON WEIGHT: 56 LBS.
|
 |
| 9410 |
|
| Automatic Charger / Analyzer
Model 9410
Micro-processor controlled and fully automatic. Analyzes battery condition and automatically selects proper charging techniques. Voltage controlled charging. Suitable for flooded and sealed batteries. Utilizes three color LED's to monitor charging status. Program for deep discharge recovery of flooded batteries. Capable of charging both small and large batteries. Switch for selecting battery type. Maintains battery charge, can be left connected to battery. Models 9520 and 9510 available in 230VAC, 50/60 Hz. PATENTED. MADE IN USA.
Charger Specifications:
MODEL NUMBER: 9410
UL OR CSA CONTINUOUS RATING: 10A
VOLTAGE: 12V
UL CRANKING ASSIST RATING: N/A
AC CORD: 6' 18-3
DC LEADS: 6.5', 16 AWG
CLAMP RATING: 50A
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 10"x9"x9"
WEIGHT: 11 LBS
|
 |
| 9420 |
|
| Automatic Charger / Analyzer
Model 9420
Micro-processor controlled and fully automatic. Analyzes battery condition and automatically selects proper charging techniques. Voltage controlled charging. Suitable for flooded and sealed batteries. Utilizes three color LED's to monitor charging status. Program for deep discharge recovery of flooded batteries. Capable of charging both small and large batteries. Switch for selecting battery type. Maintains battery charge, can be left connected to battery. Models 9520 and 9510 available in 230VAC, 50/60 Hz. PATENTED. MADE IN USA.
Charger Specifications:
MODEL NUMBER: 9420
UL OR CSA CONTINUOUS RATING: 20A
VOLTAGE: 12V
UL CRANKING ASSIST RATING: N/A
AC CORD: 6.5' 18-3
DC LEADS: 6.5' 10 AWG
CLAMP RATING: 300A
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 14"x12"x12"
WEIGHT: 21 LBS
|
 |
| 9425 ESS Technology |
|
| Automatic Charger / Analyzer
Model 9425
-
Micro-processor controlled and fully automatic.
-
Electrical Stability System (ESS) technology turns the 9425 into a stable supply for extended service procedures or re-flashes. Nominal 13.7V DC output.
-
Program for deep discharge recovery of flooded batteries
-
Patented diagnostics indicate weak or defective battery
-
Charges all types of 12 volt batteries
-
Designed for AGM, Gel Cell, Sealed, and Standard Flooded batteries including Spiral cell, Orbital, or Optima batteries
-
Maintains battery charge, can be left connected to battery.
-
Reverse polarity protected
-
"Safe In Any Weather" Operation
-
UL Listed
-
MADE IN USA
Charger Specifications:
MODEL NUMBER: 9420
UL OR CSA CONTINUOUS RATING: 20A
VOLTAGE: 12V
UL CRANKING ASSIST RATING: N/A
AC CORD: 6.5' 18-3
DC LEADS: 6.5' 10 AWG
CLAMP RATING: 300A
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 14"x12"x12"
WEIGHT: 21 LBS
|
 |
| 9430 |
|
| Portable Battery Chargers
Model 9430 30/2/150 AMP, 6/12 Volt
Manual Charger with Engine Starter. This portable manual charger has 4 charge rates to charge all 6 and 12 Volt batteries. 150 Amp Cranking Assist. 30 Amp fast charging option for both 6 and 12 Volt batteries. On/Off switch configuration enhances safety of operation. Trickle Charge setting for both 6 Volt and 12 Volt batteries. Standard Master Carton contains 1 unit.
Portable Charger Specifications:
MODEL NUMBER: 9430
VOLTAGE: 6V/12V
TYPE: MANUAL
UL OR CSA CONTINUOUS RATING: 30/2A 30/6A
UL OR CSA CRANKING ASSIST RATING: 150A
CLAMP RATING: 200A
LIMITED WARRANTY: 1 YEAR
MASTER CARTON: 1 Unit
MASTER CARTON SIZE (HxWxD): 9.5"x13"x11"
MASTER CARTON WEIGHT: 29 LBS.
|
 |
| 6118/6119 |
|
| STARTING SYSTEM CABLES
Model 6118 / 6119 Plug-In Cable
Designed with the operator and customer in mind - plug-in starting system starts cars, conveniently, faster and safer. Connection made without ever lifting service truck hood. Features a weather proof socket and polarized plug with up to 30 feet of tangle-free cables with solid copper jaws and insulated clamps with "FLEXI-SPRING" cable guard. MADE IN USA.
MODEL NUMBER: 6118
START LENGTH: 25'
VEHICLE CONNECTION LENGTH: 4'
GAUGE: 4 AWG
CIR. MIL. COPPER JACKET**: 41,300 T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
FLEXI-SPRING: NO
SAFETY LITE: NO
SAE RATING +: HEAVY-DUTY
SHIPPING DIMENSIONS: 6"x12"x12"
WEIGHT: 15 LBS.
MODEL NUMBER: 6119
START LENGTH: 30'
VEHICLE CONNECTION LENGTH: 4'
GAUGE: 4 AWG
CIR. MIL. COPPER JACKET**: 41,300 T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
FLEXI-SPRING: NO
SAFETY LITE: NO
SAE RATING +: HEAVY-DUTY
SHIPPING DIMENSIONS: 6"x12"x12"
WEIGHT: 17 LBS.
|
 |
| 8600/8601 |
|
| Specialty Testers
Model 8600/8601 Bench Tester
Compact and User-Friendly. All digital, alternator/starter tester designed with both the operator and customer in mind. Tests 12 or 24 Volt internally or externally regulated alternators. Takes up little work space (14"x27"x17"). Gives results from free-run starter or light-load alternator tests. The high-resolution, digital control panel meter is more accurate than an analog meter and EASY TO READ. Alternator, Trio, Diode, and Stator light for easier diagnosis. Oversized cast aluminum vice for easy mounting of starter or alternators. Safety interlock prohibits testing unless belt guard is in place. Double-tension springs prevent pulley slippage. No battery required for testing. 300 Amps of starter testing current. Regulated power supply is overload protected. Universal test lead included, optional leads available 8514-8519 see below. MADE IN USA
- 8514 Direct Connect Ben Tester Adapter Cable (included with 8516, 8517, 8518)
- 8516 Bench Tester Leads for Domestic Alternators (Chrysler, Ford, GM/Delco)
- 8517 Bench Tester Leads for Import Alternators (Honda, Nissan, Toyota, Etc.)
- 8518 Bench Tester Leads for Domestic and Import Alternators (Ford, GM, Honda, Toyota, Etc.)
- 8519 Bench Tester Leads for 6GC Ford Alternator
MODEL NUMBER: 8600
AMMETER: Digital LED 0-999 A
VOLTMETER: Digital LED 0-32 Volts DC
DRIVE MOTOR: 0.5 HP
LEADS: 4' 6 AWG
CLAMPS: 300 A
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 21"x30"x17"
WEIGHT: 110 LBS.
MODEL NUMBER: 8601
AMMETER: Digital LED 0-999 A
VOLTMETER: Digital LED 0-32 Volts DC
DRIVE MOTOR: 1.0 HP
LEADS: 4' 6 AWG
CLAMPS: 300 A
LIMITED WARRANTY: 1 YEAR
SHIPPING DIMENSIONS (HxWxD): 21"x30"x17"
WEIGHT: 115 LBS.
|
 |
| BOOSTER CABLES |
|
| BOOSTER CABLES – MADE IN USA
Booster Cables (See Table for Types/Specifications)
Professional quality, heavy-duty booster cables ensure quick and efficient connections. Associated Equipment has designed these cables with your safety and convenience in mind - from side terminal adapters and "Flexi-Spring" cable guards to insulated safety clamps and typically 100% Copper Jaws - T-94 Insulation Jacket is flexible to -40o F. MADE IN USA
MODEL NUMBER: 6156
TOTAL LENGTH: 12'
CABLE GAUGE: 5 AWG
CIR. MIL. COPPER, JACKET: 32, 900, T-94
AMP CLAMP: 400 A (cu-plated)
SIDE TERMINAL ADAPTERS: NO
MASTER CARTON: 6
SAE RATING +: HEAVY-DUTY
FLEXI-SPRING: NO
SHIPPING DIMENSIONS (HxWxD): 4"x11"x11"
WEIGHT: 7 LBS.
MODEL NUMBER: 6157
TOTAL LENGTH: 12'
CABLE GAUGE: 5 AWG
CIR. MIL. COPPER, JACKET: 32, 900, T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
MASTER CARTON: 6
SAE RATING +: HEAVY-DUTY
FLEXI-SPRING: YES
SHIPPING DIMENSIONS (HxWxD): 4"x11"x11"
WEIGHT: 8 LBS.
MODEL NUMBER: 6158*
TOTAL LENGTH: 12'
CABLE GAUGE: 5 AWG
CIR. MIL. COPPER, JACKET: 32, 900, T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
MASTER CARTON: 6
SAE RATING +: HEAVY-DUTY
FLEXI-SPRING (w/Stop-Go Light): YES
SHIPPING DIMENSIONS (HxWxD): 4"x11"x11"
WEIGHT: 8 LBS.
MODEL NUMBER: 6159
TOTAL LENGTH: 15'
CABLE GAUGE: 5 AWG
CIR. MIL. COPPER, JACKET: 32, 900, T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
MASTER CARTON: 5
SAE RATING +: HEAVY-DUTY
FLEXI-SPRING: YES
SHIPPING DIMENSIONS (HxWxD): 5"x11"x11"
WEIGHT: 9 LBS.
MODEL NUMBER: 6160
TOTAL LENGTH: 20'
CABLE GAUGE: 4 AWG
CIR. MIL. COPPER, JACKET: 41, 300, T-94
AMP CLAMP: 500 A
SIDE TERMINAL ADAPTERS: YES
MASTER CARTON: 5
SAE RATING +: HEAVY-DUTY
FLEXI-SPRING: YES
SHIPPING DIMENSIONS (HxWxD): 5"x11"x11"
WEIGHT: 12 LBS.
MODEL NUMBER: 6161
TOTAL LENGTH: 20'
CABLE GAUGE: 1 AWG
CIR. MIL. COPPER, JACKET: 83, 600, T-94
AMP CLAMP: 800 A
SIDE TERMINAL ADAPTERS: NO
MASTER CARTON: 1
SAE RATING +: EXTRA HEAVY-DUTY
FLEXI-SPRING: YES
SHIPPING DIMENSIONS (HxWxD): 6"x11"x11"
WEIGHT: 17 LBS.
MODEL NUMBER: 6162
TOTAL LENGTH: 15’
CABLE GAUGE: 1/0 AWG
CIR. MIL. COPPER, JACKET: 106, 400, T-94
AMP CLAMP: 800 A
SIDE TERMINAL ADAPTERS: NO
MASTER CARTON: 1
SAE RATING +: SUPER HEAVY-DUTY
FLEXI-SPRING: YES
SHIPPING DIMENSIONS (HxWxD): 5"x12"x10"
WEIGHT: 16 LBS.
MODEL NUMBER: 6163
TOTAL LENGTH: 25'
CABLE GAUGE: 1/0 AWG
CIR. MIL. COPPER, JACKET: 106, 400, T-94
AMP CLAMP: 800 A
SIDE TERMINAL ADAPTERS: NO
MASTER CARTON: 1
SAE RATING +: SUPER HEAVY-DUTY
FLEXI-SPRING: YES
SHIPPING DIMENSIONS (HxWxD): 9"x12"x12"
WEIGHT: 25 LBS.
* 6158 Equipped with "Safety Light", red light warns operator if polarity is reversed.
+ Meets SAE J 1494 Specifications.
|
 |
| CLAMPS |
|
| CLAMPS - MADE IN USA
Professional quality heavy-duty clamps for all booster cables. Replace Associated clamps or upgrade other manufacturers' products with these professional quality replacement clamps - MADE IN USA.
MODEL NUMBER: 6199
AMPS: 400 A
JAWS: COPPER PLATED STEEL
INSULATION: BONDED POWDER VINYL
FOR USE WITH CABLE (AWG): 3, 4, 6
FLEXI-SPRING: NO
REPLACEMENT JAW KITS: YES
MODEL NUMBER: 6202
AMPS: 500 A
JAWS: COPPER
INSULATION: BONDED "PLASTISOL" VINYL
FOR USE WITH CABLE (AWG): 3, 4, 6
FLEXI-SPRING: YES
REPLACEMENT JAW KITS: YES
MODEL NUMBER: 6205
AMPS: 800 A
JAWS: HEAVY GAUGE COPPER
INSULATION: BONDED "PLASTISOL" VINYL
FOR USE WITH CABLE (AWG): 1/0, 1, 2
FLEXI-SPRING: YES
REPLACEMENT JAW KITS: YES
Model 6200 Side Terminal Adapter
Associated Equipments PATENTED Side Terminal Adapters allows for easier connections on Associated-made and most other insulated clamps. MADE IN USA.
|
 |
| 6200 |
|
|
|